| 14.11.000 - 08.01.2020 |
- iPCA, SPM: Implemented a feature that allows configuring whether the attributes "Contact Name" and "Email" in the SPM request could be overwritten upon the background assignment of the MDS to the SPM request - using the configuration parameter 'SPM_REPLACE_CONTACTS_FROM_MDS'. Note: This does not apply to the manual assignment of the MDS to the SPM request using the "Assign MDS" button in the SPM panel
- PCA, Customer voting 2018: Standard "PDM BoM import (VP)" panel is extended with the checkbox "Create requests for unreported parts" that allows to bypass system-wise configuration and created/not-create SPM/SEP requests in case the matching datasheet is not found for a part. Note: Customer specific VP imports are not extended to support this feature.
- PCA, Customer voting 2018: "DS List" of the VP extended to display status, due date, supplier, and last email send of the SPM/SEP request linked to the (unreported) part.
- iPCA, PDM BoM Import (IMDS): Matching can now consider supplier code set either in the "Supplier code" attribute in the "Recipient data" of the received datasheet or the "Supplier / Company code" set for the company in the company master data management panel. This is configurable using the new configuration parameter "DS_MATCH_SUPPLIER_TARGET".
|
- iPCA: The check coverage manual has been updated.
- iPCA, VPM, Usage Analysis: The Usage analysis started from the VP panel is from now on always done via the database job. Frontend analysis in the iPCA client is not possible. This is to avoid potential long waiting times and inability to use the iPCA application while the analysis is running.
- iPCA, VPM: Improved the condition in the VP CSV import code, so that the fallback in case of non-existence or faulty value of the configuration parameter 'VPM_BOM_IMPORT_MATCHING_METHOD', is the standard VPM BOM import implementation.
- iPCA, Sent: Performance improvement of the search in the "Sent" panel.
- iPCA, IHS ready check: Extended the check that is part of the "iMDS Standard Checks" check in the "IHS Quality Checker (relevance for upload)" check configuration and that raises a message "Recyclate question must be answered with 'Yes' or 'No'" to cover also the case when the root-node being checked is an own semi-component MDS/module, which contains a material with classification 5.x which has answer on recyclate question set to "Not yet answered".
- iPCA, IMDS PI: Improved performance of the PI-MDS matching process.
- iPCA, SPM: Activated and enabled SPM bulk email option for all SPM customers.
- iPCA, IMDS PI, SPM: Improved population of the fields "Supplier code" and "Supplier Site Code" in the SPM request (optional) if the SPM request is created from the IMDS Parts Inventory.
- iPCA, SCM/USC/AIC: Improved error message for the inbox checks "Sum of percentages for Wild Cards - Rule 4.5.2.C/4.5.3.E/5.1.A", "Sum of percentages for Confidential Substances - Rule 4.5.2.C/4.5.3.E/5.1.A", "Sum of percentages for Wild Cards + Confidential Substances - Rule 4.5.2.C/4.5.3.E/5.1.A" which now contains also the calculated amount of wildcards and/or confidential substances and the allowed limit.
- iPCA, CSI: Performance improvement of the CSI analysis.
- iPCA, CSI: Various under-the-hood improvements of the CSI analysis.
- iPCA, VP, CSI: Improved performance when retrieving results of the CSI analysis.
- iPCA, ROHS Letter: Fixed bug causing that IMDS RoHS Letter did not consider all exemptions / Non-compliances (optional).
- iPCA, ROHS Letter: Corrected application codes mapping (optional).
|
- iPCA, SPM: Fixed bug causing that the ERROR was raised in the database log in case the SPM email for deactivation of the SPM request could not be sent due to lacking sender and/or recipient - now this fact is logged as INFO.
- iPCA, MSP: Fixed bug that caused that in some cases the "Replace with Multi Sourced MDS/module" dialogue could not be open in some cases.
- iPCA, CSI Management: Fixed bug causing that it was not possible to use checkbox "Available for check" in the "CSI check configuration" dialogue, which caused that a CSI rule group could not be added to the wished check configuration or remove from it.
- iPCA, VPM: Fixed the bug causing that under certain circumstances the VPM statistics could not be calculated (e.g. "Reporting Status", "Total number of items" and others).
- iPCA, SEP: Fixed the bug causing that the "Save" button was not enabled in the SEP Edit panel in case the SEP Request was in state "Released by supplier".
- iPCA, IMDS: Fixed bug causing that in some cases the company and contact in the "Supplier data" page of the loaded MDS were displayed as "undefined".
- iPCA, VPM: Fixed bug causing that value in the attribute "Compliance Date" in the "PDM VP Import Configuration" was not displayed even if it was present in the database.
- iPCA, SPM: Fixed bug causing that the value of the "MDS Type" was not correctly populated in the SPM email text in case of the Chinese language.
- iPCA, IMDS: Fixed bug causing that the upload of the rejection of the datasheet failed due to the contained character that is not allowed according to the specifications of the IMDS Advanced Interface. Such characters are now replaced with a space.
- iPCA, CSI Management: Fixed bug which caused that the version of the substance group was displayed ad ##### in case it was greater or equal to 10.
- iPCA: Fixed bug causing that in certain cases the search criterion "Type" in the substance search was not considered for the performed search.
- iPCA, SAM-M: Fixed bug causing that also deactivated hazard statements were listed among active hazard statements when adding hazard statements to a mixture or a substance.
- iPCA, VPM: Fixed bug causing that the search using the search criterion "current version" does not work in case of very old VPs created in iPCA before version 13.22.000.
- iPCA: Fixed bug causing that an incorrect iPCA thumbnail was displayed in certains cases in the mini application preview in Windows taskbar.
|
- iPCA, VPM: Improved performance of the search in Parts List in general and in case of search for part numbers.
|
| 14.10.000 - 29.11.2019 |
- iPCA, Search: Implemented action button Show rule groups" in the "Basic substances" search panel that displays the dialogue listing all related rule groups for a selected substance.
- iPCA, Customer voting 2018: The SPM request created from the DS List has now populated "Project" attribute, if this is set for the VP.
- iPCA, Customer voting 2018: The SPM request created during the VP import has now populated "Project" attribute, if this is set for the VP in the VP import panel (applies only for standard VP BOM import).
- iPCA, IMDS / SAMM: Changes of the due date are now reflected in the SPM / SEP request history.
- iPCA, LCM: Implemented dialogue panel, displayed upon click on the button "Reject online req." that allows the user to enter the reason for rejection of the IMDS LCM request together with its rejection.
- iPCA, VPM: Matching can now consider supplier code set either in the "Supplier code" attribute in the "Recipient data" of the received datasheet or the "Supplier / Company code" set for the company in the company master data management panel. This is configurable using the new configuration parameter "DS_MATCH_SUPPLIER_TARGET".
|
- iPCA: Switched renderer initialization from reflection style to lambda style.
- iPCA, VPM: Improved performance of the search when using the "VP Number" search criterion.
- iPCA: The check coverage manual has been updated.
- iPCA, SAM-M: Improved message displayed upon click on the button "Show document" in the "Documents" tab in the loaded article & mixture datasheet and the document is currently in use. The message "The file cannot accessed because it is used by another process" is displayed.
- iPCA, SPM: Removed options "User only filled recipient data in email" and "Bulk Email" from the SPM parameters panel.
- iPCA, CSI: Improved performance of the CSI analysis by 15-30% (depending on the size of the datasheet, complexity and amount of selected rule group(s) and system resources).
- iPCA, IMDS & SAM-M: Improved display of the value in the "PPM / Recyclate / Application" column in the MDS Print report so that the complete value is now visible.
|
- iPCA, SEP: Fixed a bug that clears all input fields after a validation failure message was shown.
- iPCA, SEP: Fixed bug that caused that values in all input fields were deleted in the SEP request panel after an error message was displayed upon the validation of the data entered in the request.
- iPCA, VPM: Fixed the bug causing that the attributes "Assigned Project" , "Compliance Date", "Expiry Date" and "Comment" were not populated in the VP created by the standard backend VP BOM import.
- iPCA, IMDS PI: Fixed the bug causing that the log messages stored on import of the PI part were not complete.
- iPCA, IMDS PI: Fixedd the bug causing that the weights were not stored correctly on import of the PI part.
- iPCA, MDS Edit: Fixed the bug causing that in case of a holding iPCA installation, the list of contacts in the "Supplier data" was not refreshed upon selection of another company using the "Supplier by Org.Unit" drop-down list in the same panel.
- iPCA, SAM-M: Prompt user to un-link templates when deactivating the questionnaire template.
- iPCA, SAM-M: Fixed the bug causing that the value in the column "Last Change" was not changed upon manual change of the questionnaire complaince state using the button "Questionnaire Compliance State".
- iPCA, Master Data: Fixed the but causing that the value set for the "Group" of the application code was changed on save of the application code.
- iPCA, Master Data: Fixed bug causing that in case of a special name of the company, any change done on the company record (e.g. added supplier/customer code), the save did not work due to an error.
- iPCA, MSP: Fixed the bug causing that in some special cases the datasheet was not flagged as MSP, even it should be (note: MSP initial calculation job must be re-run by iPoint support in order to fix this problem also for datasheets existing on the system prior the installation of this fix - this can be done upon the request addressed to the iPoint support via SDCS ticket).
- iPCA, Webswing: Improved layout of some search criterias, so that they are now correctly displayed.
- iPCA, CSI: Fixed the bug causing that in some rare cases not all substance groups were listed in the "Rules" tab in the "CSI Management" panel.
- iPCA, MDS check: Fixed the polymeric parts marking check to consider changed answer on submission of the datasheet by the Tier-1 (relevant for OEM customers only).
- iPCA, VPM: Fixed the label of the action button "VP to MDS" in the main VP panel.
- iPCA, SAM-M: Fixed a bug that caused that it was not possible to assign public standards to a datasheet.
- iPCA, SAM-M: Fixed bug causing that the dialogue for addition of the "Site of Usage" in the "Mixture" search panel could not be specified.
|
| 14.09.000 - 31.10.2019 |
- iPCA, SPM: Added new column "from Org.unit" into the result list.
- iPCA, SAM-M, VPM: New standard implementation of Access Mode "Org Unit": Search with Access Mode "Org Unit" lists only VPs with given Access Mode and created by user's main Org Unit.
- iPCA, LCM: Edit of the LCM request can now be restricted only to the creator of the selected LCM request and the user with permission 'LM_ADMIN' by setting the configuration parameter 'LM_RESTRICTED_EDITING' to value 'TRUE'.
- iPCA, LCM: Deletion of the LCM request can now be restricted only to the creator of the selected LCM request and the user with permission 'LM_ADMIN' by setting the configuration parameter 'LM_RESTRICTED_DELETION' to value 'TRUE'.
- iPCA, LCM: Deletion of the LCM request can now be restricted to require the remark to be set by setting the configuration parameter 'LM_DELETE_WITH_REMARK' to value 'TRUE'.
- iPCA, LCM: Buttons "Accept Request int." and "Reject Request int." in the LCM request panel are now enabled only in case the user has the permission 'LM_APPROVAL' granted.
- iPCA: Implemented support of leading wildcard for the search of the multiple part numbers.
- iPCA, VPM: Extended PDM VP import configuration to allow selection of the organization unit.
- iPCA, VPM: VP dialogues are extended with the Org. Unit selection.
|
- iPCA, ROHS Letter: Don't consider rules with action "Warning" and "Information" in RoHS Rule group - optional.
- iPCA, CSI: The storage of the results from the CSI check into the IHS comment of the IMDS datasheet can be now enabled or disabled using the configuration parameter 'CC_STORE_RESULTS_IN_IHS_COMMENT'.
- iPCA, SAM-M: In tab "Questionnaire" the calculation template code and version will be displayed which was used to calculate the compliance state of the appropriate questionnaire, before the template currently linked to the questionnaire was displayed - optional
- iPCA, SAM-M: In tab "Questionnaire" the calculation template code will be extended with "(deactivated)" when the template is deactivated - optional
- iPCA, SCM/USC/AIC: Adjusted the inbox check "Material is containing deleted or hidden basic substance" to not consider the substance "Confidential Substances" (which is by default hidden).
- iPCA, Webswing: Temporarily removed JAMA bulk import feature to ensure the compatibility with the WebSwing.
- iPCA: Adjustment in the "iMDS Standard Checks" in the "IHS Quality Checker (relevance for upload)" check configuration: changed the message type for a check checking the range of the values entered in the post-industrial and post-consumer recyclate fields from ERROR to WARNING.].
- iPCA, MDS Edit: Default application code is not anymore selected in case there are multiple applications possible available for a particular substance in material classification and substance percentage.
- iPCA, SEP & SAM-M: SEP request with undefined declaration type cannot be saved in case the supplier and contact are defined and the MCP synchronization is enabled.
|
- iPCA, Import/Export Overview: Fixed the but causing that it was not possible to save data (e.g. the import file) and retrieve the result (e.g. log).
- iPCA, Management: Fixed the bug causing that save of edited role was not possible due to an error.
- iPCA, Management: Fixed the bug causing that an error was raised in certain case when copying the user group.
- iPCA, SAM-M PI: Fixed bug causing that an error was raised when answering more than one request.
- iPCA, CSI: Fixed bug causing that a rule & sub-rule group could not be added to the rule group in certain cases.
- iPCA, VPM: Unit matching didn't worked for all cases when importing a VP e.g. warning "Unsupported graph unit: MM2" will not anymore appear.
- iPCA, Quality check: Fixed bug causing that the result of the check "Material trade name check - Rule 4.4.2.B" was always having the message type "Info" instead of one defined in the check configuration.
- iPCA, CSI Management: Fixed the bug causing that removal of the rule group including all exemption rules was not possible.
- iPCA, SEP request: Fixed the SEP request copy dialogue so that its content is completely displayed.
|
| 14.08.000 - 04.10.2019 |
- iPCA, CSI: Showing the rule group version in the CSI result, when checking CSI in the openend datasheet.
- iPCA, Parts Inventory (SAM-M): Answer request via linking to a DS: Possible only to link to DS in status "Released"
- iPCA, VPM: VP created from the CSI results can be now assigned to wished organization unit.
- iPCA, VPM: Parts List: Context menu option "Open VP Part List" is (de)activated based on the fact whether the user has access to the org. unit which the selected VP belongs to.
- iPCA, VPM: When VP is imported by SAP the configured Org Unit for the appropriate SAP configuration is set in the created VP - optional.
- iPCA, VPM: Search for option "All" set in the "Access" drop-down list in the VP search panel now considers whether the user has access to particular organization units so that it returns all VPs with access set to "Public" or "Private" or "Project" as well as all VPs with access set to "Org.Unit" which are assigned to those organization units the user has access to.
- iPCA: Own companies/org. units listed in the search panels are now displayed only if the user is allowed to access them (optional).
- iPCA, VPM: Search result list extended with the new column "Org. Unit Name [ID]".
|
- iPCA, SAM-M: Improvements of the "Usages" table in the "Usage Scope" tab of the SAM-M datasheet.
- iPCA, Check configuration: Reverted change done for the "Send/propose" tab in the parameters panel causing that the tab was enabled in the copies of the check configuration "IHS Quality Checker (relevance for upload)" which was incorrect.
- iPCA: MDS Analysis for applications: Column "App.limit [%]" is empty if the relationship between Substance, Classification, Material and AQ-ID does not exist anymore.
|
- iPCA, DB Job Manager: Fixed the bug causing that only the newest result file could have been downloaded for a DB job.
- iPCA, CSI: Fixed the bug causing that the CSI DB job started from the analysis panel could not analyze selected data.
- iPCA, SCM/USC/AIC: Fixed the bug causing that in very special cases the "Change Management - Rule 3.2.2.A/B" check could cause failure of the inbox check due to the fact that there were too many datasheet refences returned.
- iPCA, Export (Webswing): Fixed the bug causing that the open file dialogue was displayed instead of the export dialog.
- iPCA: SEP: Send request button sets the transaction status not in case of SELF declaration requests, IHS requests and DM requests.
|
| 14.07.000 - 04.09.2019 |
- iPCA, add handling for user groups to user detail view
- iPCA, Customer voting 2018: Added possibility to search for multiple IMDS IDs in the following search panels: Received, Sent, All MDS/modules, Component, Semicomponent, Material.
- iPCA, Customer voting 2018: Added optional functionality to update the ToDo's in other open received datasheets with decisions (error/no error/unacknowledged) made for the ToDo's in the currently edited open received datasheet.
|
- iPCA: Improved performance of the loading of the datasheet tree.
- iPCA, Check configuration: Enabled check category "Error" for the check "Weight deviation for part" in the "IHS Quality Checker (relevance for upload)" check configuration and its copies.
|
- iPCA: Fixed the bug causing that in some specific cases, the indicator showing the presence of the SPM request for a datasheet node was not displayed in the datasheet tree structure.
- iPCA: Fixed the bug causing that the contact details were not displayed in the "Supplier Data" page for the released datasheets.
- iPCA, MDS Edit: Fixed the bug causing that the wrong unit of measure was set for the dummy node created during the restructuralization of the datasheet in case the sub-node is a semicomponent.
|
| 14.06.000 - 07.08.2019 |
- iPCA, Customer voting 2018: Added the column "Node ID" to the result list in the "Substances" search panel.
- iPCA, Customer voting 2018: Added the column "Deactivated" to the result list in the "Received" and "Sent" search panel.
- iPCA, Customer voting 2018: Added feature allowing the export of the content of the selected substance group in the "Substance groups" panels in the CSI Management panel and in standalone master data panel.
- iPCA, Customer voting 2018: Extended log of the CSI analysis to show the date and time when the analysis was performed as well as the scope of the datasheets analyzed.
- iPCA, Customer voting 2018: Added part number of the received datasheet into the generated reason for denial.
- iPCA, SAM-M: Supporting IPC1752 3rd Amendment when importing an IPC1752 file in version 2.0.
- iPCA, assign or use assigned datasheets to answer request and delete previously assigned datasheet of re-request
|
- iPCA: Show additional data of assigned applications on the usage scope tab for mixtures.
- iPCA: Extend PI search by all missing request search criteria on SEP tab.
- iPCA: The SPM manual has been updated.
|
- iPCA, SAM-M: Fixed bug causing that it was possible to delete a mandatory description of various master data records.
- iPCA, CSI: Fixed bug causing that the VP related columns in the result list of the CSI analysis results retrieval panel in Step 4 were not displaying user-friendly values.
- iPCA, REACH Letter: Fixed problem "Unexpected char" - optional.
- iPCA, ROHS Letter: Fixed problem "Unexpected char" - optional.
- iPCA: Email history button is disabled only for request status 'created', 'Supplier assigned' and 'Supplier and Contact assigned'.
- iPCA, MDS Edit (IMDS & SAM-M): Fixed the bug causing that the drag and drop from the search panel into the datasheet tree did not work due to an error.
- iPCA, Export: Fixed the bug causing that the export using "Export All" switch did not work from the "All MDS/modules" panel.
- iPCA, MDS Edit (SAM-M): Fixed bug causing that the SAM-M datasheet was not saved upon the close of the changed datasheet.
- iPCA, SAM-M, SEP: The transaction status of SEP request was reset in case the SELF declaration request was marked to be cancel in SuHu/MC, button control was already ficed.
- iPCA, REACH Letter: List of substances was not correctly displayed - optional.
|
| 14.05.000 - 10.07.2019 |
- iPCA, SAM-M: Usage analysis for substances and exemptions from VP and PI is now independent from assigned site and Org. structure. If VP or PI is not assigned to a site the columns Site, Business Unit and Business Platform will be empty in the result.
- iPCA, SAM-M: Performance improvement in usage analysis for substances and exemptions.
- iPCA, SAM-M: Added file extension "csv" to the result of the usage analysis.
- iPCA, SPM: Added support of the 'Supplier Site Code' (optional).
- iPCA, SPM: Added two new columns "PDM System" and "PDM Client" that are displayed in case the PDM SPM module is licensed (optional).
- iPCA, SAM-M: CoC compliance report - optional.
- iPCA, MSP: Extended MSP replacement dialogue with the:
- "Load" button that allows to preview the datasheet before applying it in the MDS tree instead of the original MSP part
- datasheet status column to inform the user if the datasheet can be used in the MDS tree or not
|
- iPCA: Added support of national characters in import/export/save file dialogues (pre-condition is iPCA DB on UTF8/UTF16).
- iPCA, MSP: Extended MSP to allow to consider received datasheet in any wished recipient status. This requires configuration changes by iPoint and re-initialization of MSP datasets.
|
- iPCA, Received & Sent: Fixed bug causing that the checkbox "incl. deactivated" was not displayed in the search mask in "Received" and "Sent" search panels.
- iPCA, SAM-M, VPM: Fixed usage analysis for substances and applications, no usage was found in case the type of the selected VP was different to "Product_VpProduct".
- iPCA: Fix re-calculation messagetext shown at Questionnaire tab in article worksheet.
- iPCA: Storing an existing table configuration without changing the configuration name.
- iPCA: Fixed search in VP with reporting and compliance status.
- iPCA, SAM-M: Fixed the problem when releasing an Article or Mixture using a status with 2 digits.
- iPCA:Searching DS List, use column DSCOMPLIANCESTATUS and Select only the visible columns
- iPCA: Fixed the bug causing that the initial configuration of any parameters panel could not be saved.
- iPCA, SAM-M, SEP: If Request is self declaration deactivate the Cancel Button (SEP) and the Cancel Request Button (PI)
- iPCA: Fixed the behavior when deleting reusable (full) nodes.
|
| 14.04.000 - 12.06.2019 |
- iPCA, Sent: Added new search criteria and columns "Sending User" and "Sending User (Email)" in the result in the "Sent" panel that are visible if the new permission SENT_INCLUDE_SENDER_DETAILS is granted to the user.
- iPCA, Sent: Added new search criteria "IHS comment" in the "Sent" panel.
|
- iPCA: The LCM manual has been updated.
- iPCA, MDS: Improved "Supplier Data" tab and added a search option allowing to search for the contact in the contact panel which is helpful in case of many contacts existing.
|
- iPCA, SCM/USC/AIC: Fixed the bug in the inbox check that could cause that the check failed in case of very long text in the reason for denial field containing national characters (on UTF8 database).
- iPCA: Fixed the bug in the IMDS daily download causing that the substances contained in the non-IMDS substance groups were deleted after each run of the daily download.
- iPCA, REACH Letter: The Wrong template was selected in case no SVHC was inside a datasheet - optional.
- iPCA, REACH Letter: Generating REACH Letter for larger VPs raised an error - optional.
- iPCA, SCM/USC/AIC: Fixed the bug in the inbox check that could cause that the check failed in case of long name of the CSI rule group that is containing national characters (on UTF8 database) used in the inbox check .
- iPCA, SAM-M: Suppliers will get no more reminders in case the process type of the SEP request is "Self declaration".
- iPCA, SCM/USC/AIC: Various fixes for the change management check.
- iPCA, Usage analysis: Step 2 - Fixed the bugs causing that - value for the search criteria "State" was not saved in the search configuration - the search configuration could not be deleted
|
| 14.03.000 - 28.05.2019 |
- iPCA, Sent: Added new column "Sender" which displays the organization unit from which the datasheet has been sent.
- iPCA, SAM-M, VPM: Supporting BoM Requests for Questionnaires from SAP and providing the questionnaire compliance status to SAP - optional
- iPCA, SAM-M, VPM: Possibility to trigger the questionnaire compliance status calculation for one or more VPs - optional
- iPCA, LCM: Extended result list in the LCM panel.
- iPCA, PDM Interface Configuration: Added new panel "PDM SPM Configuration" to configure profiles for creation of SPM requests from external PDM systems.
|
- iPCA, LCM, SPM: Non-IMDS fields now support special national characters.
- iPCA, SPM: Fields in the "Labels for the Email" area in language tabs in the SPM Parameter panel now support non-unicode characters on UTF8 database.
- iPCA, CSI, IMDS: Improved performance when retrieving data from CSI analysis in Step 4.
- iPCA, CSI: Improvements of the "Result" search criteria in Step 3 of the CSI wizard when retrieving results.
|
- iPCA, IMDS Daily Download: Fixed bug causing that in some cases the daily download failed for IMDS Release 12.
- iPCA, PI, VPM: Fixed bug causing that after editing of the request / part in the Parts Inventory or VPM panel the icon disappeared until the new search was done.
- iPCA:IMDS, fix empty material type during answer request to prevent NPE.
- iPCA. DB Job Manager: Fixed bug causing that in some cases the search did not work.
- iPCA, SAM-M: Fixed error "invalid identifier" while declaring compliance status (CoC) in answering a request in PI.
- iPCA, VPM: Fixed datasheet matching, in case of part number should not be considered as it is (depends on configuration VPM_BOM_IMPORT_PART_NUMBER_MANIPULATION), the matchng didn't worked in all cases - optional.
- iPCA: Fixed the problem causing that in some cases the editing of the datasheet tree the error was displayed and the tree structure was not reflecting the actual composition of the datasheet.
- iPCA, AIC: Fixed bug that AIC check could fail in case of special characters used in generated reason for denial text on UTF8 database.
- iPCA, CSI, IMDS: Fixed bug causing that the option "Error" was not visible in the "Result" search criteria in Step 3 of the CSI wizard when retrieving results.
|
| 14.02.000 - 30.04.2019 |
- iPCA, Usage Analysis for basic substances with details: Performance improved.
|
- LCA calculation of the recycling phase fixed.
- iPCA, MDS Edit/View: Fixed bug causing that visualization of existence of open received MDSs for unreported parts in the datasheet tree did not work in case there was more than one open received MDS available for an unreported part.
- iPCA, MDS Edit: Fixed bug causing that data entered in the "Additional Data" tab in the "Recipient Data" panel of the datasheet was not saved in case of the update.
- iPCA:IMDS, fix re-request button to enabled after answer request and reject response.
- iPCA, CSI Management: Fixed bug causing that the export of the rule groups in the "Rule Groups" tab did not work.
- iPCA, MDS Edit / MSP: Fixed bug causing that in some cases the panel replacement of the datasheet flagged as MSP with another MSP datasheet could not be closed.
|
- iPCA, SAM-M, CCfSAP: In case Supplier Request will be updated from SAP, Request in SuHu will be automatically canceled or automatically accepted in iPCA and a new Request will be created.
|
| 14.01.000 - 10.04.2019 |
- iPCA, UI for setting the check configuration for a questionnaire.
- iPCA, SPM & LCM: Added search criteria "Remark" into the SPM and LCM search panels (optional).
|
- iPCA, VPM: Improved performance of the VPM BOM import in case of very large BOMs.
- iPCA, DB Job Manager: Now the date & time displayed reflects the time zone set on the client computer running iPCA application.
- iPCA, MDS: Changed field "IHS Comment", so that also special national characters are now supported.
- iPCA, IMDS R12: Removed display of German material names in results from the CSI analysis.
- iPCA, IMDS R12: Removed display of German material names in results from the usage analysis.
- iPCA, IMDS R12: Removed display of German material names in results from the MDS/module analysis and MDS print of the datasheet.
- iPCA, IMDS R12: Adjustments of various areas to no longer display German material name in the results from checks, analysis, reports, etc.
- iPCA: Implemented configurable email validation to support email addresses as per customer needs (changeable only by iPoint support). Default validation works for all possible email address formats as of now.
|
- iPCA, CSI Management: Fixed bug causing that the "Substance group" drop-down in the search mask in the "Rules" tab was always empty.
- iPCA, SAM-M, SAP: Implemented mechanism to avoid change of the request status back to "Supplier and contact" assigned when importing data from SAP (optional).
- iPCA, MDS: Fixed the bug causing that after the language change of the application, the substance names in the "Application" tab in the IMDS datasheet shown in the language in which the application was originally launched.
- iPCA, CSI Management: Enabled the possibility to add rule group as an exemption even it has a different substance group than the substance group of a rule.
|
| 14.00.000 - 08.03.2019 |
- iPCA, IMDS R12: Extended daily download from IMDS to support download of adjusted norm data.
- iPCA, IMDS R12: Added new option "Not Yet Answered" to the possible answers on the recyclate question for the material in the MDS tree ("Recyclate" tab in the "Recipient Data" tab (part of the OEM Additional Data attributes) is not extended).
- iPCA, IMDS R12: Extended check "iMDS Standard Checks" in the "IHS Quality Checker (relevance for upload)" check configuration with a new check checking the range of the values entered in the post-industrial and post-consumer recyclate fields.
- iPCA, IMDS R12: Extended check "iMDS Standard Checks" in the "IHS Quality Checker (relevance for upload)" check configuration with a new check checking if the recyclate question is answered in case of the materials of the material classification 5.1.a, 5.1.b, 5.2 and 5.3 in case of the material weight > 5g.
- iPCA, IMDS R12: Extended "Recipient Data" tab for components and semi-components with new checkbox "Legacy Spare Part".
- iPCA, IMDS R12: Extended "Recipient Data" check in the quality check to check the "Legacy Spare Part" flag.
- iPCA, IMDS R12: Added new check "Received MDS set as legacy spare part" in the inbox check to the "Legacy Spare Part" flag.
- iPCA, IMDS R12: Extended "Recipient data" tab in the "Parameters" panel in the quality check configuration with the checkbox "Legacy Spare Part"
- iPCA, IMDS R12: Extended daily download from IMDS to support download of legacy spare part flag.
- iPCA, IMDS R12: Added orange as a color code for visualization of hidden application codes (in "Application" sub-tab in the "Ingredients" tab in loaded IMDS datasheet).
- iPCA, IMDS R12: Added visualization of hidden application codes in the same way as done for inactive application codes (in "Application" drop-down list in "Rules" tab in the CSI Management panel).
- iPCA, IMDS R12: Extended daily download from IMDS to support download of adjusted norm data.
- iPCA, IMDS R12: Hidden application codes are shown in orange color in the "Application" panel of the loaded IMDS datasheet.
- iPCA, IMDS R12: Implemented brand new check "Change management - Rule 3.2.2.A/B" for change management and removed previous change management checks.
- iPCA, IMDS R12: Extended daily download from IMDS to support download of MCPTAll.dat file.
|
- iPCA, IMDS R12: Extended MDS/Module analysis for recyclates to cover also materials with answer on the recyclate question set as "Not Yet Answered".
- iPCA, IMDS R12: Adjusted application code check that is part of the "iMDS Standard Checks" in the "IHS Quality Checker (relevance for upload)" check configuration to correctly check usage of hidden application codes.
- iPCA, IMDS R12: Extended options in search option "Status" in Step 2 of the usage analysis for application codes wizard.
- iPCA, IMDS R12: Removed confirmation pop-up messages displayed upon population of material name and material trade name into the EN or DE field (depending on the language in which iPCA is launched).
- iPCA, IMDS R12: EN/DE Language switches are hidden by default unless the material datasheet, that was released internally before IMDS IMDS R12 went productive, is loaded.
- iPCA, IMDS R12: Material name in the loaded datasheet tree is displayed only in English language.
- iPCA, IMDS R12: Material name in search result table in the "Material" tab in main search panel is displayed only in English language.
- iPCA, IMDS R12: Material name in search result table in the "Sent" tab in main search panel is displayed only in English language.
- iPCA, IMDS R12: Material name in search result table in the "All MDS/Modules" tab in main search panel is displayed only in English language.
- iPCA, IMDS R12: Check "Material name contains Symbol (Mat.classific. 5.1.x, 5.2, 5.3)" renamed to "Material name contains symbol (material classifications 5.1.x, 5.2, 5.3)" and changed to not consider German values anymore.
- iPCA, IMDS R12: Check "Trade Name check - Rule 4.4.2.B" renamed to "Material trade name check - Rule 4.4.2.B" and changed to not consider German values anymore.
- iPCA, IMDS R12: Check "Copied nodes (name with "Copy_" or "Kopie_")" renamed to "Name starts with prefix "Copy_" or "Kopie_"" and changed to not consider German values for the material anymore.
- iPCA, IMDS R12: Adjusted application code check to correctly deal with the hidden application codes.
- iPCA, IMDS R12: Adjusted event management notification "IMDS - Changes on Application Codes" to contain also hidden application codes.
- iPCA, IMDS R12: Adjusted panel for selection of application codes to not show hidden application codes.
- iPCA, IMDS R12: Extended search criteria in Step 2 of the usage analysis for application codes to cover also hidden application codes.
- iPCA, IMDS R12: Fixed and improved "Regulatory Information" panel for IMDS datasheet.
- iPCA, IMDS R12: Adjusted "Regulatory Information" panel for IMDS datasheet to display only product types that are relevant for the material classification of the material for which the panel is opened.
- iPCA, IMDS R12: Adjusted "Regulatory Information" panel for IMDS datasheet to display only product types that are relevant for the material classification of the material for which the panel is opened.
- iPCA, IMDS R12: Improved behavior of the "Release All" button in the "Regulatory Information" panel for IMDS datasheet.
- iPCA: Rulegroup Search Panel displays wrong button "Apply rules" instead of "Apply" button; enable Cancel button for all AddDialog calls.
|
- iPCA:IMDS, fix search by request status in Parts Inventory and SPM.
|
| 13.29.000 - 22.02.2019 |
- iPCA, CSI: New functionality to add all rules from a rule group when editing a rule group.
|
- iPCA, IMDS: Changed ransformation and export to IPC1752, do not create RoHS exemptions, due to restrictions of IPC1752 format - optional.
|
- iPCA: Extend the query in step 3 (Select exemption) as described above to get only the relevant applications.
- iPCA: Fixed bug causing the activation/deactivation.
- iPCA, SAM-M: The compliance status was not recalculated in all cases upon approval of the SEP request in "Parts Inventory" or in "SEP" tab.
- iPCA, SAM-M: Fixed problem in the IPC1752 import which caused deletion of referenced mixtures or articles in case of a re-request or when the Answer Request button is used more than once.
- iPCA, SAM-M: Fixed problem in "Replace old version", not in all cases the new version was found.
- Fixed a bug in the PI CSI analysis that caused the CSI analysis fails.
|
- iPCA, IMDS: Improved performance in detail usage analysis.
|
| 13.28.000 - 01.02.2019 |
- iPCA: When answering a request, copy the REQUEST_T.CUST_PART_NO to the OwnPartNo of the article or mixture.
|
- iPCA, IMDS: Improved performance of loading data for the OEM Additional Data tabs in the "Recipient Data" tab and improved usability by addition of the loading bar informing user that the data are being loaded.
- iPCA, LCM: The "Supplier Site Code" field in the LCM edit panel is now read-only in case the customer set in the request is Volvo Car Corporation of one of its organization units (optional).
|
- iPCA: Fixed a but that caused that a login to iPCA was not possible in case database parameter NLS_DATE_FORMAT was set to a different date format than 'dd.mm.yyyy'.
- iPCA, CCfSAP: Fixed Product Volumn / Quantity import.
- iPCA, IMDS: Fixed bug that caused that the OEM Additional Data tabs in the "Recipient Data" tab were not enabled even if applicable data existed.
|
| 13.27.000 - 23.01.2019 |
- Fixed an error that occurred when starting the CSI analysis from the VP search.
- iPCA, VPM, CCfSAP: Fixed the bug causing that under some circumstances the SAP BoM import deleted structure in the sub VPs after the root VP was imported.
- LCA: Solved problem with ecoinvent references update.
- LCA: Fixed Bug when calculating the disposal phase.
|
| 13.26.000 - 18.01.2019 |
- iPCA, SAM-M & VPM & PI: Implemented a solution which ignores duplicated parent-child occurrences in the VPM BOM import accompanies with addition of an appropriate message into the VPM BOM import log.
- iPCA: Implemented feature visualizing if the open received datasheet for the missing positions in the loaded IMDS datasheet.
|
| 13.25.000 - 11.01.2019 |
- iPCA: Implemented new permissions for granting right to edit "IHS Item Number" field in IMDS and SAM-M datasheets.
- iPCA, added Questionnaire search dialog for pdm configuration.
- iPCA, PDM Standard Import (IMDS): Added support of new unit of measures in the BOM import file with conversion to the unit of measures supported by the IMDS online system.
- SAM-M, Questionnaire: Option to configure which questionnaires are added to new requests by default.
- iPCA, SAM-M, Questionnaire: Supporting compliance status for questionnaires in CCfSAP.
- iPCA, SAM-M, DMM: Added new configuration parameters "DMM_SEARCH_NODES_WITHOUT_DOCUMENTS" and "DMM_MANAGE_REQUESTS" controlling the search across the documents.
|
- iPCA, IMDS MDS Editing: Maximum supported value for the "Pos-No." field extended to 99,999,999.
- iPCA, Car Model: Improved performance of the search by part number in the MDS List.
- iPCA, PDM BoM import (iMDS): Improved several log messages for the import.
- iPCA, It is Used the same dialog to search for language specific applications as in the master data applications, now it's possible to search with one field in the columns Name, Application / Usage and Phrase code
- Changed the labels in the 'Notification sales per year' Report from supplier to custome
- iPCA, Master Data: "Projects" and "Plants" panels can be now accessed only if new dedicated permissions are granted. Action buttons in the panels are also respecting the new permissions.
- iPCA, SAM-M: Rule group tab: show only productive released rule groups if user has not permission "CC_INSPECTOR".
- iPCA, BOM import: Size of the column "Position No." increased from 5 to 8 places.
- iPCA, SAM-M - VP Partslist: Make Source type mandatory
- RRR: Now, Java 8, 9 and 10 are supported.
|
- iPCA, Substance groups: Fixed bug causing that a substance could not be added to the substance group.
- iPCA: Fixed bug causing that the import of IPC1752 class A failed due to the incorrect weight check.
- iPCA, Car Model: Fixed bug that caused that a search by part number in the MDS List did not worked due to an error.
- iPCA, SAM-M: Fixed bug that caused that replace old version feature did not worked in case of the article SAM-M datasheet.
- iPCA, PDM BoM import (iMDS): Fixed bug causing that special characters (e.g. umlaut) set in the BOM import file were not processed correctly when reading the import file, so they were stored and displayed incorrectly in iPCA.
- iPCA, IMDS datasheet editing: Ability to set and edit the value in the "IHS-Item No." field in the IMDS datasheets is now controlled by the respective permissions.
- iPCA, Parts Inventory (SAM-M): Fixed bug causing that "Answer request" button in some special cases was set to inactive (optional).
- iPCA, VPM: Fixed bug that prevented "DS List" panel from being opened.
- iPCA: Fixed a performance problem in the feature visualizing if the open SPM request exists for the nodes in the loaded IMDS datasheet.
- iPCA: Fixed bug causing that the search in "Classifications" master data panel did not returned any records in case the iPCa client was started in the direct mode.
- iPCA: Fixed the bug that caused that a database error was raised in case the database job was finished in less than one second.
- iPCA, PI SAM-M: Fixed bug that caused that the CSI analysis from SAM-M Parts Inventory failed due to a fact that the due date which was used for previous compliance calculation was meanwhile deleted from the "CSI Due Dates" master data table.
- iPCA, JAMA: Fixed bug causing that an ORA-00001 error was raised during the JAMA BOM import in some cases.
- iPCA, SPM: Fixed bug that prevented re-submitted datasheet is linked with the SPM request that was created after the datasheet was initially rejected.
- iPCA: Fixed bug causing that in some cases the creation of the parts pre-treatment technologies excel report could fail.
- iPCA, LCM: Fixed bug causing that the status of the LCM request was not updated in case the datasheet assigned to the LCM was (un)flagged as "Preliminary MDS".
- RRR: Fixed bug causing that it was possible to save the RRR product model and perform the conversion even if the EDIT_PRODUCT_MODEL permission was not granted to the user.
- iPCA, SAM-M, Fixed SDCS-16195: MDS cannot be loaded when containing a CoC repsonse for non-productive released rule groups.
- iPCA, Car Model: Fixed bug causing that the error was raised upon click on the "Check unchecked" button in the "MDS List" (optional).
- RRR: Fixed bug causing that the cut/paste operation for a single material in the materials library does not work.
|
| 13.24.000 - 29.11.2018 |
- iPCA, LCM: Implemented new permissions and configuration parameters.
- iPCA, Master Data: Implemented new permissions for access to the "Projects" and "Plants" master data panels.
- New module Questionnaire, Phase 1
- iPCA, new search filter 'Exclude/Include Substance(s)' in the Substance Group Panel to provide the possibility to search for substance groups containing or not containing one or more selected substances
|
- iPCA, AIC: Extended maximum length of the remark from the CSI rule in the reason for denial generated upon the AIC check.
- iPCA, PDM BOM Import (IMDS): Extended support of length of the column from 3 to 8 for column 9.
- iPCA, IMDS MDS check: Changed behavior of below listed checks for check of amount of wildcards and confidential substances in parent material in case the portions of children materials are defined in range:
- Sum of percentages for Wild Cards - Rule 4.5.2.C/4.5.3.E/5.1.A.
- Sum of percentages for Confidential Substances - Rule 4.5.2.C/4.5.3.E/5.1.A
- Sum of percentages for Wild Cards + Confidential Substances - Rule 4.5.2.C/4.5.3.E/5.1.A
- iPCA, SAM-M: The compliance status is recalculated upon approval of the SEP request in "Parts Inventory" or in "SEP" tab.
- iPCA: Implemented improved and more flexible validation of the user email address.
|
- iPCA, LCM: Fixed bug that caused that LCM request could not have been deleted.
- iPCA, CSI: Fixed bug in step 2 of the CSI wizard when creating a CSI Job, which caused that no or wrong rule group was applied to step 3.
- iPCA, SAM-M, Parts Inventory: Fixed bug causing that the CoC import fails in case the supplier code is not defined.
- iPCA: Fixed bug causing that iPCA client froze under certain circumstances.
- iPCA, SAM-M, IPC1752, PI: Substances which were marked as confidential could not be imported as a specific internal mapping was missing. This has now been corrected and all substances with the name confidential are mapped to the substance with the unique IPOINT ID e525bb53-2654-42e2-950b-71ce9b4bbd6f .
- iPCA, Mixture: Fixed bug causing that the application codes of some types could not be found in the search panel for definition of the usage scope(s).
|
| 13.23.000 - 13.11.2018 |
- iPCA, Organizational structure: Preparation for feature to move Sites to another Business Unit, or move Business Unit to another Business Platform (optional).
- iPCA, Checker: "SCM/USC Inbox Check" extended with new check "Part Number check" to allow easy identification if the part number from the root node of the datasheet from the supplier exists in the TE-C part number inventory or not.
- iPCA, PDM BOM Import (IMDS): Added support of new unit of measures in the BOM import file with conversion to the unit of measures supported by the IMDS online system.
- iPCA, Usage Analysis for applications: Added application code ID to the description of the application code.
- iPCA, Organizational structure: Preparation for feature to edit ID and NAME of a Business Platform, Business Unit and Site (optional).
- iPCA, Organizational structure: New feature to edit ID and NAME of a Business Platform, Business Unit and Site (optional).
- iPCA, Organizational structure: New feature to move a Business Unit to another Business Platform or a Site to another Business Unit (optional).
|
- iPCA, SAM-M: Improved labels for columns in the table listing applications in the "Site of usage" panel used for definition of the usage scope for mixtures.
|
- iPCA, SAM-M: Fixed bug causing that an error was displayed upon click on the "Move" button in the Organization structure search panel.
- iPCA, IMDS, Q-check: Fixed bug causing that an error was mistakenly raised for the check "Polymer marking answered with N/A" in case the recipient was assigned to the datasheet.
- iPCA, SAM-M: Fixed the problem "Character string buffer to small" in the Product Volume Report, that happened in case there are too many code assigned to the Org. Unit.
- iPCA: Fixed bug causing that in some cases the database job created by the user was not started.
- iPCA, SAM-M: Fixed issue causing that P-phrases (in the "GHS Classification & Labelling" tab in the mixture) were not correctly displayed in case iPCA was opened in French or Spanish language mutation.
- iPCA, Usage Analysis for applications: Fixed but causing that some application codes were displayed multiple times.
- iPCA: Fixed bug causing that the import of IPC1752 full material declaration failed for FMD request due to the incorrect weight check.
- iPCA, Usage analysis: Fixed bug causing that in some cases the usage analysis for components/semicomponents/material did not found all hits.
|
| 13.22.000 - 25.10.2018 |
- iPCA, VPM: Introduced the possibility to create standard VP by the background import (optional).
- iPCA, PDM BOM Import (IMDS): Added support of new quantity unit of measure 'PC' (piece) with the same behavior same as used for 'EA' or 'ST'.
- iPCA, Event Manager: Implementation of new events for SPM and LCM requests.
- iPCA, Event Manager: Implementation of new events for SPM and LCM requests.
- iPCA, IMDS: Provided functionality for automatic transformation and export to IPC1752 Version 2.0 - optional.
- iPCA, Checker: "SCM/USC Inbox Check" and "IHS Quality Checker (relevance for upload)" extended with new check "Trade Name check" to allow easy identification if the material and trade name in the datasheet from the supplier are the same or not.
- iPCA: Implemented feature visualizing if the open SPM request exists for the nodes in the loaded IMDS datasheet.
- iPCA, Import/Export Overview: Jama/Japia bulk import
- Jama/Japia: Supporting revision 2.50 in import and export - optional.
- iPCA, Contact Management & SPM: Changes done on the contact (e.g. corrected email, updated email, deletion of contact, etc) are now reflected in open SPM requests where the affected contact is set as a main contact or in cc email field.
- iPCA, SAM-M: Introduced new CSI status "No Data Found" for CoC parts.
- iPCA, SPM: Implemented SPM friendly reminder email feature.
- iPCA, BOM Import (IMDS): Implemented feature allowing bulk BOM import in the "PDM BoM import (iMDS)" panel.
- iPCA, BOM Import (SAM-M): Implemented feature allowing bulk BOM import in the "PDM BoM import (SAM-M)" panel.
- iPCA, VPM: Extension of PDM BoM Import (VP) panel with new attribute "BOM Create Date".
- iPCA, VPM: Extension of VP Create / Edit / Create Version / Copy / Delete panels with new attribute "BOM Create Date".
- iPCA, SPM: Implementation of additional conditions for SPM-MDS matching (optional).
- iPCA, Usage Analysis for application codes: Added new columns "Path to substance" and "Material Weight [g]".
|
- iPCA: The check coverage manual has been updated.
- iPCA, MSP: All MSP datasheets are now listed in the MSP replacement panel - not only ones with matching primary part number (optional).
- iPCA: The IHS manual has been updated.
- iPCA: The SPM manual has been updated.
- iPCA, Usage Analysis for application codes: Renamed columns headers in the result of the analysis.
- iPCA: TBD.
- RRR: Now, the "Copy" button in the "Open Product Model" panel is controlled by the permission "EDIT_PRODUCT_MODEL".
- iPCA, PDM BOM Import (IMDS): Extended support of decimal places from 3 to 6 for columns 8 and 14.
|
- iPCA, Checker: Fixed a bug in the "Material Substance Check SC90 - Type 1" check present in the "SCM/USC Inbox Check" and "IHS Quality Checker (relevance for upload)" check configurations that caused that under some special cases the result of the check was incorrect.
- iPCA, SAM-M: Fixed issue causing that hazard pictograms (in the "GHS Classification & Labelling" tab in the mixture) were not correctly displayed in case iPCA was opened in French or Spanish language mutation.
- iPCA, SAM-M: Fixed bug causing that in some special cases the "IPCA ID" for articles and mixture was empty.
- iPCA, SAM-M: Fixed the problem that an error message appeared on saving a copy of a mixture, although the mixture was successfully saved.
- iPCA, VPM: Fixes to show correct supplier in e.g. datasheet list.
- iPCA, VPM: Fixed triggering CSI job creation for VP CSI status calculation.
- iPCA, SAM-M, IPC1752, PI: Fix for the problem with the IPC1752 bulk import that files of IPC1752 version 2.0 containing sub products could not be correctly matched to requests based on their product id. Erroneously the product id of the sub product was used instead of the top-level product id. Now the correct product id is used to identify the matching request.
- iPCA, SAM-M: Fixed SAM-M supplier import, adjusted length check according configuration.
- iPCA, SAM-M, IPC1752, PI: The controls for the action buttons for answering requests, cancelling requests and creating a re-requests in the SAM-M parts inventory have been optimized to only allow these actions when the request is in a compatible combination of request status and synchronization status with the MC. This to prevent inconsistencies and requests getting stuck in status combinations which are incompatible with the general workflow.
- iPCA, SAM-M: Fixed some minor bugs in RoHS Letter for VP (optional).
- iPCA, Management: Fixed bug causing that the search using the "Level" search criteria in the "Configuration" tab is returning records also on lower level.
- iPCA, InfoDyne Interface: Fixed bug causing that the data file for exporting SDS could not be downloaded via Import/Export overview panel in a proper file format (optional).
- iPCA, SAM-M & PI: Fixed bug causing that the VPM PI BOM import fails because unreported PI record was not found (optional).
- iPCA, CSI Management: Fixed CSI rule group import.
|
| 13.21.000 - 13.09.2018 |
- iPCA, SPM: SPM Parameters panel extended with fields for friendly reminder email feature.
- iPCA, SPM: Implementation of configuration parameter for control of way of SPM-MDS matching (optional).
|
- iPCA: The user management user manual has been updated.
- iPCA, Deactivation of MDS/Module: Removed "current version" search criteria in the "MDS/Module" tab in the "Deactivate MDS, companies or org-units" panel.
|
- iPCA, SAM-M: Fixed bug that the technical ID of the storage class was mistakenly displayed in the search criteria for mixtures under "Additional search properties -> Search parameters for characterizations".
- iPCA, Car Model: Fixed bug causing that "check unchecked" operation was failing.
- iPCA, CSI Management: Fixed bug causing that it was possible to add rule group as an exemption even it has a different substance group than the substance group of a rule.
- iPCA, IDMS MDS Edit: Fixed bug causing that in some cases an error is raised on replacement of the node with the new(er) version of it.
- iPCA, SAM-M: Fixed bug causing that the + button was disabled for search criteria "Classifications" and "Applications".
|
| 13.20.000 - 03.09.2018 |
- iPCA, SAM-M: RoHS Letter for VP (optional).
- iPCA, VPM & RRR: VPM to RRR conversion with support of JLR fields.
|
- iPCA, IPC1752: Fixed bug causing that the error was raised during the IPC1752 import on a request after this has been answered with a different datasheet and then re-requested (optional).
- iPCA, VPM: Fixed bug causing that the search using "Supplier Name" attribute was not returning expected results in the Parts List (optional).
- iPCA, Usage analysis for basic substances: Fixed bug causing that values in the columns "*Total share of substance in part...*" and "*Total weight of substance in part*" had value duplicated if the MDS was send to two recipients, tripped if send to three recipients, etc.
- iPCA, Usage analysis for basic substances: Fixed bug causing that values shows in most of the "minimum" and "maximum" columns were switched.
|
| 13.19.000 - 10.08.2018 |
- iPCA, SAM-M: Introduced new AQ Type 'RoHS IV'.
- iPCA, REACh Obligations: Extended matching for import of product volumes to consider also IMDS datasheets (configurable) (optional).
|
- iPCA, GDPR: Changed text of the checkbox in the contact create/edit dialog and in the "Supplier Contact Data Import" dialog .
- iPCA, CSI: Slightly improved performance of the CSI analysis done via DB job, especially if big amount of datasheets is being analyzed.
- SAM-M SEP/PI:Bulk accept/reject in PI and SEP is not considering if compliance status is calculated in all selected Requests.
- iPCA, VPM: When a VP without assigned datasheets is selected for an analysis, a notification appears and tells that no datasheet to analyze was found.
- iPCA, SEP: Extended maximum limit of characters for reject reason field in the SEP request.
|
- iPCA, SAM-M: Fixed bug causing that the UN Number was in some cases not taken over from the original mixture on the creation of a new version of it.
- iPCA, Product Volumes: Fixed bug that caused that the product volume data entered for IMDS datasheets were not displayed anymore after refresh, reload of the datasheet or after navigating between tabs within the datasheet (optional).
- iPCA: |Fixed a bug that caused that upon re-requesting a declaration in the SAM-M PI the flag "on behalf of supplier" was copied into the new request.
- iPCA, VPM: Fixed bug that caused that in some very special cases the standard VP BOM import was failing (optional).
- iPCA, Company Management: Fixed bug causing that the "Delete" button was in some special cases incorrectly disabled.
- iPCA, SAM-M: Fixed bug causing the no value was shown in the "Signal word" drop-down list in the "GHS Classification & Labelling" tab in the mixture datasheet upon the hot switch of the application language (optional).
- iPCA: Fixed bug causing that export of result list via DB job did not fetch required results in all cases (more data could be exported, never less).
- iPCA, PI: Fixed bug causing that the headers of the compliance columns in the export file generated by the DB job for the result list in the Parts Inventory were not named correctly but like 'CSI001' etc (optional).
- iPCA, VPM: Fixed bug causing that the part that was manually added via the Parts List was considered as unreported even if the matching datasheet was found. This could cause some unexpected and non-wished behavior (optional).
- iPCA, PI: Fixed bug causing that the export of result file in the "Parts Inventory" panel to XLS file format failed (optional).
- iPCA, Chemistry Manager: Fixed several bugs related to the "Request update of regulatory information" button.
|
| 13.18.2018 - 27.07.2018 |
- iPCA, PI: RoHS letter considers CoC data (tab compliance in the datasheet) (optional).
|
- iPCA, PI: Fixed bug causing that export of the result list in the Parts Inventory panel into the XLSX format done via DB job was in some cases failing (optional).
- iPCA, SAM-M: Applications could not be searched by application groups in the master data dialogue. This is now fixed so that search results are limited to the applications belonging to the application group which was entered as search criteria.
- SEP: Fixed a bug causing that the declaration type "Full" was displayed even if the declaration type was unset.
- SEP: Fixed a problem, which prevented viewing of SEP requests in status 'Sent' when DMM module has not been licensed.
- iPCA: Requests which have already been sent to the SuHu MC app and which have not yet been answered by the supplier are now automatically cancelled in the MC when users answer them in iPCA on behalf of the supplier. This means that answering a sent request in iPCA is now triggering the cancellation of the open request in SuHu MC.
|
| 13.17.000 - 20.07.2018 |
- iPCA: The LCM manual has been updated.
- iPCA: Improved drop-down list "Substance group types" in the search mask in the "Substances" panel, so that the entries in it are fully visible.
|
- iPCA, SAM-M: Fixed bug causing that the article and mixture datasheets could not be created.
- iPCA, RoHS Letter: Fixed a bug causing that the value in the "Product No." attribute was not displayed.
- iPCA, SAM-M & PI: Fixed bug causing that the VPM PI BOM import which failed was shown in the "Import/Export overview" panel with status "Successful" (optional).
|
| 13.16.000 - 13.07.2018 |
- iPCA, VPM & CCfSAP: Extended BOM transfer from SAP to iPCA so that the organization structure details in the VP are populated.
|
- iPCA: The LCM manual has been updated.
- iPCA, SAM-M: Extended area for display of the release status in the "IHS" tab of the Article and Mixture datasheet.
- iPCA, PI: Improved performance of the Parts Inventory parts import (optional).
|
- iPCA, Volume Report: Fixed the bug causing that the error was displayed in case the search was done using "Period of time" search criteria (optional).
- iPCA: Fixed the bug causing that it was possible to assign more than 10 CSI checks to the check configuration.
- iPCA: Fixed the bug causing that it was possible to change check category for CSI checks in the check configuration even if this was not in the edit mode.
- iPCA, PI: Fixed the bug causing that the PI panel was displayed without any content.
- iPCA, SAM-M: Fixed a bug that caused that for the article created by the IPCA1752 1.0 import, the declaration type was set to "Partial", even if the import file contained 100% declared composition.
- iPCA, SAM-M: Fixed the encoding issue causing that some German characters were incorrectly displayed in the "UN Numbers" master data panel (optional).
- iPCA, PI: Fixed bug causing that "Show Response" button was enabled also in case the unreported part was selected.
- iPCA: Fixed bug causing that also the deactivated material classifications were returned by the search even if the search was done only for active records.
- iPCA, Management: Added ad-hoc check of the length of entered text into the "Full name" field in order to prevent the user unfriendly database error message shown until now.
- iPCA, Countries Management: Fixed bug in the "Countries" master data panel that caused that the text in the dialog displayed upon click on the "*Deactivate*" button was incorrect (optional).
- SEP: Fixed a bug causing that the declaration type "Partial" was displayed even if the declaration was of type "Full".
- iPCA, Event Manager: Fixed bug causing that the display of emails tabs in "Parameter" tab was not working correctly.
- iPCA, VPM & PI: Fixed few incorrect and misleading error codes in the VP BOM import (optional).
|
| 13.15.000 - 29.06.2018 |
- iPCA, SAM-M: Datasheet matching implemented for customers who using parts inventory, considering UOM also while looking for datasheets - optional.
- iPCA: Now it is possible to use "Export All" function to export all data relevant for the search criteria also into the XLSX file (not just to CSV file).
|
- iPCA, SAM-M: Further updated catalog allowing classification of materials as hazardous to water. Also improved existing and added missing French and Spanish translations.
- iPCA, CSI Management: The "CSI Check configuration" panel was extended with the column "Configuration No." to display number of the check configurations.
|
- iPCA, PI: Fixed bug causing that if multiple cells copied from Excel were pasted into the "Part Number" search field, the were not separated by a value separator but pasted as a single value.
- iPCA, PI: Fixed bug causing that answering the request failed if the full name of the user doing the operation was too long.
- iPCA, Master Data: Fixed bug that prevented records in the Classification master data to be edited or copied in some situations.
- iPCA: Fixed bug causing that the storage class was not displayed in the "Transport" tab.
- iPCA, SAM-M: Fixed error in RoHS letter generation for complex Articles.
- iPCA, SEP: Fixed but causing that value selected for the "Process Type" was not saved in some cases when editing the SEP request.
- iPCA, CSI: Fixed an error causing that in Step 2 of the wizard for launching the CSI analysis, empty spaces could be displayed in the area for due dates.
- iPCA & RRR: Fixed bug causing that the VP to RRR conversion was failing when started from iPCA client started in 3-Tier mode.
- RRR: Fixed bug causing that the PDF report option could not be disabled for ISO Annex A and ISO Annex A Chinese reports.
- iPCA: Fixed the bug causing the the export of result list (from panel for assignment of region-region type to the datasheet) to Excel was failing.
- iPCA, SAM-M: Now the "Load" button is enabled if the deactivated mixture/article is selected in the search result list.
- iPCA, SAM-M: Fixed bug causing that two objects in the Article IHS tab were located in the same position so one of them was not displayed.
- iPCA, Sort-out: Fixed visibility and enabling/disabling of the "Deactivate" button in search panels (Article, Mixture, Article / Mixture, All MDS/modules) and in the "Deactivate MDS, companies or org. units panel" panel.
- iPCA, Received: Fixed the bug causing that after the language change of the application, the IMDS recipient status was shown in the language in which the application was originally launched.
- iPCA, Quality check: Fixed the bug causing that after the language change of the application, the messages in the quality check were shown in the language in which the application was originally launched.
- iPCA, IMDS: Fixed bug that caused that some datasheets could not be deleted.
|
| 13.14.000 - 08.06.2018 |
- iPCA, SAM-M: Implemented more friendly error messages in import log if mandatory values are missing in the SAM-M BOM import file.
- iPCA: TBD.
- iPCA: TBD.
|
| 13.13.000 - 01.06.2018 |
- iPCA, SAM-M: Reminder mails are send to supplier in case they are in status supplier invited (SuHu/MC), in this case the reminder mail contains the invitation and the list of requested parts- optional.
- iPCA, SAM-M: Invitation send to suppliers for requests are now visible in the Email-History - optional.
|
- iPCA, SAM-M: Updated catalog allowing classification of materials as hazardous to water.
|
- iPCA, Event Manager: Fixed bug that prevented Event Manager panel from being opened.
- iPCA, Parts Inventory: Fixed bug causing that customer's part name in the SEP request was not changed upon edit of a part name in the SAM-M Parts Inventory.
- iPCA, MSP: Fixed bug that caused that the MSP flag was not set in some cases after the received datasheet was accepted.
- iPCA, Login: Fixed bug that caused that the relogin after automatic logout of the user after inactivity was not possible.
|
| 13.12.000 - 17.05.2018 |
- iPCA, Chemistry Manager: Addition of feature allowing to request missing Chemistry Manager information for a datasheet node.
|
- iPCA, SEP: Fixed bug causing that editing of the SPM request was not possible.
- iPCA, SAM-M: Fixed bug causing that in some cases the article/mixture could not be loaded.
- iPCA, MSP: Fixed the bug causing that the MSP flag was not removed from the datasheet on removal of value from "IHS-Item-No." field that hold the part number causing the datasheet was considered as MSP.
- iPCA, Region Management: Fixed several bugs in the "Region" master data panel (optional).
|
| 13.11.000 - 11.05.2018 |
- iPCA: The IHS manual has been updated.
- iPCA, CSI: Step 4 - Column "Substance Info" replaced with two new columns "Substance Name" and "Substance CAS No.".
- iPCA, VPM: DS List - "Weight" column split into "Weight" and "Weight UoM" and "Quality" column split into "Quantity" and "Quantity UoM".
|
- iPCA, VPM: Fixed the bug causing that the search for reporting status "Reported" in DS List did not returned datasheets in preliminary status.
- iPCA, Chemistry Manager: Fixed bug causing that details in newly created regulatory information were not reset correctly.
|
| 13.10.000 - 04.05.2018 |
- iPCA, Chemistry Manager: TBD.
- iPCA, Q-FDS Interface: Implemented feature allowing the publish of SDS data (optional).
|
- iPCA, VPM: Parts List - "Weight" column split into "Weight" and "Weight UoM" and "Quality" column split into "Quantity" and "Quantity UoM".
- iPCA: The VPM manual has been updated.
|
| 13.09.000 - 25.04.2018 |
- iPCA, Volvo Supplier Site Code: The error message raised by the quality check in case the incorrect value is entered in the "Supplier Code" field for all Volvo Car Corporation companies was changed.
- iPCA, Volvo Supplier Site Code: The error message displayed upon entering incorrect value into the "Supplier Code" field for all Volvo Car Corporation companies was changed.
- iPCA, Volvo Supplier Site Code: Now, the "Supplier Site Code" field in the "Additional data" tab in "Recipient data" page is read only for all Volvo Car Corporation companies (from May 3rd 2018 on).
- iPCA, IMDS: Extended Structured Flatbill (SFBOM), calculated weight which is lower than 0.000001 was rounded to 0 gram due to the restriction to AI interface, now it will be set calculated to milligram - optional.
- iPCA, VPM: using specific weight of Mixtures while calculating the DS total weight.
- iPCA, InfoDyne Interface: Implemented feature allowing the export of SDS data (optional).
|
- iPCA, Event Manager: Removed obsolete LCM events "New GMIR request" and "New Powerway request" and deleted all event subscriptions created for them.
- iPCA, CSI: Improved performance in showing CSI detail results in IMDS environments.
- iPCA, Contact Management: The "I confirm this person has agreed that personal data is stored here." checkbox is now enabled when correcting non-IHS contact in the contact edit panel.
- iPCA: The English check coverage user manual has been updated.
|
- iPCA, MDS/module analysis: Fixed bug that caused that a parent material was shown in the result for analysis type "Material" in case it was present in the analyzed datasheet more than once.
- iPCA, SAM-M: Replaced "Mixture No." with "Article No." in the pop-up dialog in case of deletion of an article.
- SEP: Fixed the bug causing that the SEP requests could not be displayed in the SEP application.
- iPCA, CSI: Fixed comment in CSI Wizard, where "Usage Analysis" was mentioned.
- iPCA, CSI: Fixed the bug causing that the value in column "Data Source" displayed when retrieving results from CSI analysis from Parts Inventory was shown as ID instead of human readable value.
- iPCA, Virtual Product Type master data: Fixed a bug causing that panel was accessible also to the users without the permission "VPM_ADMIN" granted.
- iPCA: Fixed the bug causing that the result from the CSI analysis could not be retrieved in case big number of records were selected in Step 3.
- iPCA, Document request: SEP request was extended with a feature to request document(s) from the supplier (optional).
- iPCA, VPM: Fixed bug that caused that the value set by the user for the "Source" attribute when adding/copying the part in the Parts List was not saved.
|
| 13.08.000 - 13.04.2018 |
- LCA: Added Ecoinvent 3.5 support. Added Umberto results import. Added Datasets import export. Added Ecoinvent processes view. Improved startup time. Improved saving performance. Improved GUI.
- iPCA, Document Management: New document types were implemented.
|
- iPCA, CSI: Improved performance of loading of results in Step 4 when retrieving results from CSI analysis started from the Parts Inventory.
- iPCA: The manual for the user management has been updated.
- iPCA, Roundtrip Export: F�r Holding Kunden korrigiert.
- iPCA, Usage analysis for basic substances: Improved labels of column headers in the result of the usage analysis for basic substances done via database jobs. Added several new columns into the result file. Performance improvements and various bugfixes.
|
- iPCA, PI: Fixed problem in step 4 of retrieving CSI results. Step 4 was not shown with details about the selected errors.
- iPCA, AIC Whitelist: Fixed the bug causing that the search mask in tab "History" was not fully cleaned up upon click on the "Reset" button (optional).
- SEP: Fixed the typo in the email subject in case the data for SEP request were accepted by the QM.
- iPCA, SAM-M: Fixed datasheet analysis for mixtures under mixtures.
- iPCA, Management: Fixed the bug that caused that the checkboxes "*exclude from automatic user deactivation*" and "*exclude from password expiry*" could get sometimes checked on save of the newly created user.
- iPCA: Fixed the bug causing that the CSI analysis for VP could not be started from DS List in case big number of records were selected for the analysis.
- Thin Client: Fixed bug causing that the search for received datasheets did not work in case the supplier was defined as (one of the) search criteria.
- iPCA, Management: Fixed the bug causing that the incorrect icon of the role was displayed in some cases (e.g. named instead of concurrent, etc).
|
| 13.07.000 - 28.03.2018 |
- iPCA, CSI Management: Improved performance of the CSI rule group import.
|
- iPCA, VPM: Fixed bug causing that the SAM-M BOM import into the VP could fail.
- iPCA: Fixed name of the part import in the "Import/Export Overview".
- iPCA: Fixed the bug that caused that the save search criteria feature did not worked in the DB job manager panel.
|
| 13.06.000 - 27.03.2018 |
- iPCA, GDPR: Added new columns 'Creator', 'Creation Date', 'Last change user' and 'Last change date' to contact create/edit dialog.
- iPCA, GDPR: Added new checkbox to "Supplier Contact Data Import" dialog to confirm that persons agreed to store their personal data in the iPCA.
- iPCA, GDPR: Added new checkbox to contact create/edit dialog to confirm that person agreed to store their personal data in the iPCA.
- iPCA, GDPR: 'Contact person' and 'Email Address' columns are now displayed in the result grid in the "Sent" and "Received" panels only if new permissions for GDPR are granted.
|
- iPCA, IPC1752: Improved substance matching for SuHu/MC declarations.
- iPCA: The IHS manual has been updated.
|
- iPCA: Fixed an installation problem on some environments.
- iPCA, CSI: Fixed bug causing that CSI analysis for mixtures could not be started as well as that existing results could not be retrieved.
- iPCA, CSI: Minor fix while checking a datasheets with declaration and CoC (SAM-M / optional).
- iPCA, SPM: Fixed the bug causing that user without granted permission SPM_EDIT was able to edit, save and send SPM request. SPM_READ_ONLY now overlays any other related SPM permissions. SPM functionality is available for users with permission "SPM". Without that permission, any SPM functionality is not accessible. "Create SPM request" function is now only available for users with permission "SPM_EDIT".
|
- iPCA, CSI: Performance improvements in step 4 of CSI wizard.
|
| 13.05.000 - 16.03.2018 |
- iPCA, GDPR: Implementation of permissions 'SENT_INCLUDING_CONTACT_DETAILS' and 'RECEIVED_INCLUDING_CONTACT_DETAILS'.
- iPCA, GDPR: Added new checkbox to "Supplier Contact Data Import" dialog to confirm that persons agreed to store their personal data in the iPCA.
|
- iPCA, GDPR: Now couple of user attributes are deleted on setting user profile to "inactive" with the database job.
|
- iPCA, Region Management: Fixes several bugs in the "Region" master data panel (optional).
- iPCA: The user management manual has been updated.
|
| 13.04.000 - 08.03.2018 |
- iPCA: Added check that prevents deletion of the MDS/module if this is a predecessor for datasheets existing in iPCA with version 999.xx (this avoids upload error for new datasheets due to non-existent original MDS/module in IMDS online system).
- iPCA, Event Manager SEP Requests: Implementation of new events for SEP requests.
- iPCA, CSI: New column called "Data source" is added into the result table from the CSI analysis to easily distinguish between Coc and FMD/PMD calculation.
|
- iPCA, SPM: Column "Supplier code" moved in the excel file for SPM bulk email so that it is now located after the "Customer description" column.
- iPCA, Usage analysis for basic substances & applications: Step 3: Corrected maximum allowed length of the value in "Name" field in "Options for saving analysis result" panel to match with the database specification to avoid the failure of the DB job for the analysis due to the too long name.
|
- iPCA: Fixed the bug causing that the CSI analysis called from the loaded article/mixture was not executed.
- iPCA, MDS Edit: Fixed bug causing that a substance could have been deleted from the system on the removal from the datasheet.
- iPCA, External Advice Workflow: Fixed few bugs (optional).
- iPCA: Fixed the bug causing that permissions for region management were displayed under incorrect parent node in the permission tree (optional).
- iPCA: Fixed the bug causing that "Current version" and "Deactivated" checkboxes could not be both checked at the same time (across the application).
- iPCA, VPM: Fixed the bug causing that the configuration parameter 'VP_MODEL_CSI_RECALC_DELAY_DAYS' was configured to incorrect value (7) which could cause that the VP compliance status was calculated just once a week.
- iPCA, CSI: Fixed bug causing that results from CSI analysis were incorrect in case the substance group(s) used in the rule group contained wildcard substance(s).
- iPCA, Organizational structure: changed VP mode to dyncamic instead of released (optional).
|
| 13.03.000 - 19.02.2018 |
- iPCA, External Advice Workflow: Implementation of search restriction to External Advise Requests for advise providers (optional).
- iPCA, External Advice Workflow: Now it is possible to request and provide external advice for the SEP request (optional).
- iPCA, Document Management: Now it is possible to add documents to a released SAM-M datasheet (depending on the configuration parameter "ADD_DOCUMENT_RELEASED_MDS") (optional).
- iPCA, Document Management: Implementation of configuration parameter "ADD_DOCUMENT_RELEASED_MDS" for allowing/disabling addition of documents to a released SAM-M datasheet (optional).
- iPCA, Region Management: Implementation of "Region Types" master data panel (optional).
- iPCA, IMDS: Extended Structured Flatbill (SFBOM), setting missing application codes based on IMDS rules or own rules - optional.
|
- iPCA: The manual for the user management has been updated.
- iPCA: The check coverage manual has been updated.
- iPCA, Region Management: Implementation of SCM/USC/AIC and Quality check for verification of presence or the region in the IMDS datasheet (optional).
- iPCA, Region Management: Extensions of "Region" master data panel (optional).
- RRR: Format of the ISO and GB/T recyclability report was improved and adjusted.
|
- iPCA, CSI Management: Fixed bug causing that in some cases the own CSI rule group could not be released.
- iPCA; CSI: Fixed problem for Articles/Mixtures in case declaration type is set to "Undefined" and no CoC is attached.
- iPCA: Fixed bug causing that also non-active IMDS substance could have been searched and added to the IMDS material when creating/editing it.
- iPCA: Fixed bug causing that also non-active IMDS substance could have been searched and added to the IMDS material when creating/editing it.
- IPC1752 Import, SUHU/MC Exchange: Fixed problems regarding mixture (semi component) creation, relational data is set accordingly
|
| 13.02.000 - 19.01.2018 |
- RRR: RRR Import Window docked in Product model group.
- iPCA, SPM: Added new condition - documents set for SPM requests - for grouping of SPM request emails.
- iPCA: Now the German manuals has been removed from help page and release notes.
- iPCA: The manual for the user management has been updated.
- iPCA: Compare module has been removed from Car Model.
|
| 13.01.000 - 12.01.2018 |
- iPCA, Result list export: The color of the header in the XLS(X) has been changed to iPoint red color.
- iPCA, "Date of first request" and "Received reg. requests" columns are shown only when CHEMISTRY_MANAGER_MODULE configuration parameter is set to TRUE and user has CHEMISTRY_MANAGER_VIEW permission.
|
- iPCA: The English VPM user manual has been updated.
- RRR: Removed old iPCA import.
- iPCA, Daily download: Contact priority flag is reset to "Standard" in case the contact is set to deleted or deactivated (optional).
- iPCA: Application codes set for substances in materials are now kept when moving the materials under the dummy component/semicomponent nodes created by "Restructure node" feature.
- iPCA, MDS Check: Now the IHS ready check does not raise an error in case the polymeric parts marking answer is "Not Applicable" and material weight is > 100g and the recipient is an OEM customer.
|
- iPCA: Due to performance issues, a data migration has been removed from version. It will be reworked and postponed to a later version.
- iPCA: Fixed an installation problem on some environments.
- RRR: Double Glass column fixed in ISO 22628 material flow report.
- iPCA,VPM: Fixed bug preventing from creation of the SAM-M datasheet for missing position in the "DS List" in case the weight and/or UoM are not set.
- iPCA, MDS/Module analysis: Fixed bug causing that the incorrect material classification was displayed in the result from MDS/module analysis for materials for materials contained within the complex materials.
- iPCA, VPM: Fixed problem with matching that caused that also hidden and deactivated datasheets were matched.
- iPCA, Tree Search: Now if the user clicks "New search" after user clicks on "Continue from toplevel node" then the dialog is not disposed.
|
- iPCA, Export all feature has been enabled to Deactivation panel.
- iPCA; CSI: Improved performance when loading the data in the last step of the CSI analysis results retrieval (after Step 4).
|
| 13.00.000 - 18.12.2017 |
- iPCA, DB-Job Manager: Addition of "Show" button allowing to open results of the job in associated program.
- iPCA, Checker: "IHS Quality Checker (relevance for upload)" extended with new checks "Disable send to recipient" and "Disable propose to recipient" to avoid sending/proposing datasheet to customer who does not accept that way of datasheet submission.
- iPCA, DB-Job Manager: Addition of "Set priority" button which allows to easily change the priority of the DB job.
- iPCA: Addition of the dialog shown on click on the red cross button in the main application panel to avoid closure of the application by mistake.
- iPCA MDS/module edit: Addition of feature for removal of assigned flexible version.
- iPCA: Addition of possibility to change application language without relogin.
- iPCA, Checker: "SCM/USC Inbox Check" extended with new check "Material is containing deleted or hidden basic substance" to allow easy identification/rejection of the usage of the deleted or hidden substance(s) in the datasheet from the supplier.
|
- iPCA, SPM: "Bulk SPM email" functionality is now available to all customers.
- iPCA: Implementation of "Compare" button into the "Received" panel which allows to compare all received datasheets (optional module).
- iPCA, Management: Implementation of search panel in the "Roles" tab which allows to easily search for wished permissions (by name, type, grant) in the permission tree.
- iPCA, DB-Job Manager: Changed approach for calculation of value in the "Total Time" column (column is also renamed to "Elapsed time"). Improved and fixed some labels.
- iPCA: The English manual for the SPM has been updated.
- iPCA: The English manual for the user management has been updated.
- iPCA: The English manual for the iPCA IHS has been updated.
- iPCA: The English check coverage user manual has been updated.
- iPCA: The English VPM user manual has been updated.
- iPCA, MDS view/module: Addition of icon shown in the "Supplier data" tab of the IMDS datasheet in case the contact is not active anymore.
- iPCA, Master data: "CSI Due Dates" master data panel was extended to display also dynamically generated due dates.
- iPCA, LCM & SPM: Changed way of searching for organization units in "SPM" and "LCM" tabs in the main search panel.
- iPCA: The English manual for the LCM has been updated.
- iPCA, LCM: "Request contact assignment" functionality is now available to all customers.
- iPCA, SPM: Bulk SPM email now contains Excel document that lists all the details about requested parts.
|
- iPCA, Master Data: Fixes and improvements of "Companies / Legal units / contacts" panel.
- iPCA, MDS/module analysis: Fixed bug causing that a material containing selected application code was not selected upon click on the "Load" button.
- iPCA, VPM: In special cases a CSI job was generated, altough only a part was added without a linked datasheet.
- iPCA: Fixed bug causing that "incl. deactivated" checkbox was not displayed in the search criteria configuration panel in the "Received" and "Sent" tabs in the main search panel.
- iPCA, Check configuration: Fixed bug that prevented saving data in the "AQ limits" tab in the parameters of the "SCM/USC Inbox Check" check configuration.
- IPC1752 Import: Fixed error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small" which could happen sometimes
|